fbpx

Epoxy Resin Molds – Ahonui Artisan Reusable – Large 12.5″ x 20.5″ x 2″

$249.99

GUARANTEED SAME DAY SHIPPING (Monday-Friday)

Epoxy Resin Molds – Ahonui Artisan Reusable – Large 12.5″ x 20.5″ x 2″

These Epoxy Resin Molds are the last style resin form you’ll ever need. It is constructed of 3/4 inch thick High Density Polyethylene (HDPE). Epoxy resin is unable to adhere to polyethylene so with this form you will never need to tape your forms or use releasing spray again.

The form will be pre assembled, sealed, and ready for a pour as soon as you remove it from the box. The TWO long sides of the form will be “permanently” secured and sealed with RTV silicone gasket maker with bolts and threaded inserts. (These sides can be removed if you ever need them to be, but it isn’t necessary to remove them for normal function.)

The Large size form is specifically designed to make (1) Large size Charcuterie or serving board, and is also perfect for small resin tray molds!

6 in stock

Description

Epoxy Resin Molds measurements are INTERIOR dimensions. Great for Coasters, Beer, Wine, and Shot Flight trays. Also suitable for sulk use with all 3 styles of my wine caddy templates.

What is included in the box:

  • (1) Pre-sealed and Assembled Ready-to-Pour Large Form with Integrated T-track, Levels, and Leveling Feet
  • (3) HDPE Clamp Bars
  • (3) Sets of T-track Hardware
  • (1) 3oz. tube of RTV
  • (12) HDPE Clamp Blocks
  • (1) Screwdriver for Leveling Feet
  • (1) Resin Form Instruction Manual
  • Purchase Bonus Coupon Codes

Disclaimer:

This form is intended to save you the hassle of completely rebuilding, taping, spraying releasing agent, and finding clever ways to clamp your work in place. These forms will produce a blank, not a finished product. This form is intended to make setting up and resetting for your next pour as quick and efficient as possible to maximize work flow. It is not intended to produce a final piece that is ready to sell.

Due to the slick nature of the HDPE, there will be minor manufacturing “scuff” marks on the surface of the form. These marks will transfer to your resin but will be planed and/or sanded away very easily when working the blank to final thickness. These scuffs will in NO way affect your final piece.

Integrated Leveling System:

The leveling system consists of 2 bubble levels. The bubble levels help you visually adjust your form to be level, regardless of your workspace.

Instructions for Use:

Removing the Blank from the Form: 

With this design and epoxy’s inability to adhere to the HDPE, it is only necessary to remove one of the two short sides of the form. Both sides are removable if your blank gives you any trouble.

To remove your blank, remove the end cap(s) by removing the 3 bolts on the side you have chosen to remove. These bolts are paired with galvanized steel threaded inserts to ensure the long life of your form. This means the removing and reinserting of the bolt will not wallow out the plastic from repeated use, like regular screws would do.

Take a wide chisel or putty knife and place the chisel blade, flat side against the HDPE, at the point where the blank meets the form’s bottom piece, then lightly tap the chisel with a hammer. The blank will pop lose from the form and you will be able to pull it from the form very easily. If your thicker blank is giving you a bit of trouble and needs a little added encouragement, you can remove the other end cap the same way.

Resetting the Form for the Next Pour:

Take the end cap(s) that you removed and clean the old RTV off of the end cap. Apply a new continuous bead of RTV with the included tube. Reattach the end cap to the form, tightening the 3 bolts until you get a small amount of RTV squeeze out. Clean the squeeze out with a large diameter straw, and then let sit over night (or 12 hours) for the RTV to set and you are ready for another pour!

Additional information

Weight 15 lbs
Dimensions 22.5 × 12.5 × 4 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Instagram

Follow us @superclearepoxy

5 Star Superclear epoxy resin review
Love this resin!
“Pretty easy to work with, flows out beautifully.”
Brett Amazon Customer
5 Star Superclear epoxy resin review
Dried clear and was easy to use!
“Used for geode table and it worked perfectly”
Richard Amazon Customer
5 Star Superclear epoxy resin review
Good product!
“I use it for coûter tops and tables!”
Jacques Amazon Customer
5 Star Superclear epoxy resin review
Great stuff!   
“Thanks fiberglass coatings. Great product. I’m a long time user. Hundreds of uses with only one failure!”
Robert Amazon Customer
5 Star Superclear epoxy resin review
Great product!
I used this epoxy for a river table, this is a great product, I will definitely be purchasing more. I loved how quickly it sets up, I poured in layers about 1/4″ thick and it was tackey in about 1-1/2 hours. I was able to get all of my pours done within a day.
Cassandra Amazon Customer
5 Star Superclear epoxy resin review
Very easy to use
“The best I have used for my custom Tumblers…”
Heidi Amazon Customer
5 Star Superclear epoxy resin review
Easy to work With!
“I’ve ordered twice now. Great product, easy to use, No odor. 1:1 ratio makes mixing easy and great working time.”
Timothy Amazon Customer
5 Star Superclear epoxy resin review
Great Product!
“Have used different brands. I really like this. Very clear and cures quickly. Love it!”
Debra Amazon Customer
Menu